The Weekend Project: Popcorn and Cranberry Garland
A strand of white popcorn and red cranberries is about as simple as holiday decorating gets. You need a needle, strong thread, a bowl of plain popcorn and a bag of fresh berries. The one thing you have to plan ahead for is the popcorn, which should be popped a day or two early so it goes stale.
What You Need for a 5-Foot Strand
A 5-foot garland takes about 2 cups of fresh cranberries and about 6 cups of air-popped popcorn, cooled completely. You will also need a thin, sharp embroidery needle, about 6 feet of strong cotton or nylon thread, scissors and, if you like, a thimble.
For thread, heavy-duty sewing thread, waxed dental floss, or fishing wire all work. Coated floss or thread rubbed with beeswax helps the pieces slide down more easily. If you buy microwave popcorn, pick one without butter or salt.
Prepare the Popcorn and Berries
Pop the corn a day or two before you plan to string it and leave it out in the open. Fresh popcorn breaks too easily to string, and the staler the popcorn gets, the easier it is to thread. While you wait, rinse the cranberries and throw out any soft ones.
How to String the Garland
- Cut the thread to about 6 feet and thread the needle. Much longer than that and it tangles easily. Tie a large knot at the far end so nothing slips off.
- Pierce a cranberry and slide it down to the knot. Then make sure the knot holds.
- Push the needle through the thickest part of each piece of popcorn, easing each piece down to the knotted end before you add the next one.
- Pick a pattern and repeat it. One easy option is three pieces of popcorn, then one cranberry. Slide pieces down a few at a time, because popcorn breaks more easily if you push more than three pieces at once.
- Stop with a few inches of bare thread left at each end. Tie off the last piece with a secure knot and handle the strand gently.
- To make a longer garland, make more strands and tie their ends together.
Allow roughly an hour. How long it takes depends on how long you want the garland to be. Work over a tray or a towel, since cranberry juice can stain.
Hanging It on the Tree
Put the lights on the tree before the garland. Ornaments come last, after the garland. Start at the top and drape the strand loosely over the branches, well away from the lights. As a guide, plan on about nine feet of garland for each foot of tree height.
Pets may be tempted by a popcorn and cranberry garland on the tree, so if you have animals, hang it high or on a mantel instead. After you take the tree down, the popcorn and cranberries can go into the compost.
Ways to Adapt It
- For young children: Give each child a needle of their own and a string just over a foot long.
- Without a needle: Thread everything onto wire instead. Measure the full length you need, string half of it, close that end with a wire loop, then unwrap the other half and finish stringing.
- Small ornaments: String the popcorn and berries onto narrow-gauge floral wire, then twist the wire into a ball or another shape.
- For a longer life: Use dried cranberries in place of fresh ones, or leave the berries out.
- To keep it for next year: Seal the strand with shellac spray. Give each side one coat, let it dry, then add a second coat. Once it is sealed, the garland is decoration only and should not be eaten by people or put out for animals.
FAQ
– Why does my popcorn keep breaking?
It is probably too fresh. Leave plain popcorn out for a day or two before you start, and push the needle through the thickest part of each piece.
– How much garland do I need for my tree?
Plan on about nine feet of garland for each foot of tree height. Make it in short strands that are easy to handle, then tie them together.
Sources
- How to Make a Popcorn-Cranberry Garland for Your Christmas Tree — howcast.com
- How to Make Popcorn and Cranberry Garland — gardenandcrafty.com
- DIY Cranberry & Popcorn Garland — saltycanary.com
